Office buildings - residential and electrotechnical appointment
The modular boxes are designed for placement of electrical equipment. Their sizes range from 3х3, 3х6, 6х9, 6х12, to 6х15 m.
The valve chamber of the foam extinguishing station is designed for foaming solution supply from the pumping station to the foam generators. The valve chamber is located in a modular box consisting of the base and frame covered with three-layer insulated panels.
The valve control chamber is designed for extinguishing of a potential fire on the site and in reservoirs with high-expansion air filled foam.
The operator’s room is designed for comfortable and effective operation of the personnel and reliable work of
The modular box is designed for heating of the duty personnel and installation of various domestic and service equipment.
The modular box on drum utilization is designed for steaming and pressing of
The station, capacity Q=315 m³/hour, is designed for water supply of industrial construction sites as a relift pumping plant with water withdrawal from clear-water reservoirs and its supply to the combined water network.
The station, capacity 140 m3/hour, is designed for usage in the systems of water pumping and hydraulic fill.
The gatehouse is designed to provide comfortable conditions for the service personnel.
The tank is designed for drainage and storage of light and dark oil residues, crude oil, oils, and condensate including water mixtures from process lines (pipelines) and equipment during repair of plants at oil refining, petrochemical and gas processing enterprises.
The station is designed for pumping water and foam solution having properties similar to water in viscosity and chemical activity with a temperature up to 358 К (85 оС).
These are designed for receipt, transformation and distribution of electricity of alternate three-phase current, frequency 50 Hz, voltage 6/0,4 kV, remote control and protection of electrical receivers of alternate current, voltage 380/220 V.
The tank is designed for condensate drainage including its mixtures with water, from process lines (pipelines) and equipment during repair of plants at oil refining, petrochemical and gas processing enterprises.
The station is designed for extinguishing of a potential fire on the sites and reservoirs with high-expansion air filled foam on the basis of foam generator ПО-6К. The ring firefighting main serves as a water feeder.
The pumping station is designed for water supply for firefighting purposes on the site. It is a unit consisting of lower modules and spacer modules mounted on the site into one building according to the mounting drawing which is supplied with the module.
This is designed for sheltering oil production and injection wells from the impact of climatic and environmental factors.
In the module there is an aboveground assembly of fire hydrants. Water to the module is supplied with the help of two lines (for 4 connections) or four lines (for 8 connections) with further distribution of water for fire extinguishing purposes into four hoses (for 4 connections) or eight hoses (for 8 connections).
Situated inside the modular box there is an isothermal module for liquid carbon dioxide of the liquid fire fighting gas unit. It is designed for liquid CO2 storage and its supply in case of fires of class А, В, С and energized electrical equipment for fire extinguishing purposes.
It is designed for heating of one-floor housing and industrial facilities and equipped with ringed systems of water heating by forced pumping of heated water as well as heating of drinking water for daily needs.
The module is designed for storage of 100% supply of foam generator in a container and fire fighting equipment (fire hoses, motor pumps, spare fire extinguishers etc.).
The station is designed for water and foaming solution supply to the firewater main network. It is installed on the territory of housing settlements and industrial enterprises.
Gas-fueled reciprocating power plant (Jenbacher) is designed for decentralized power supply of facilities with heating and electrical energy at the place of their location.
Diesel power plants are designed for decentralized power supply of facilities with electrical energy at the place of their location; for work with isolated load or network, with a single unit or parallel units.
Pig traps designed for installation on the main and field gas pipelines are used to periodically send and receive pigs and various scraping tools inside the pipes.